 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| a.s. 04.03.15/issue d filename: sd-69008-0140 arbor press fixture part no. 69020-0140 for molex product eng no . 90075 8/6 & 8/8 way description this fixture is used to terminate 90075 8/6 and 8/8 way connectors onto pre-cut and stripped cable. features 1. this fixture can only be used in a standard arbor press part no. 69020-0660. 2. 3 - termination positions. 3. for loose piece terminals only. 4. hand loading of assembled connector and cable. specification size: 100mm x 100mm x 50mm weight: 3kg working services: none
a.s. 04.03.15/issue d filename: sd-69008-0140 set-up 1) fix upper block onto arbor press spindle and tighten locking screw. 2) place lower termination fixture onto mounting platform of arbor press. 3) make a few samples following the next section (operation) and then check termination heights. if adjustment is required see adjustments section. operation 1) insert connector into lower termination block. 2) push pre-stripped cable into connector. 3) pull handle down fully to terminate connector. 4) turn handle to start position. 5) release connector latch and slide harness backwards out of fixture. a.s. 04.03.15/issue d filename: sd-69008-0140 adjustments 1) if termination height is incorrect then follow the procedure below. 2) loosen the stud nuts in the centre of the arbor press. 3) loosen clamp bolt to column at the rear of the arbor press. 4) adjust upper part of arbor press up or down using the nuts on the central stud. 5) re-tighten nuts and clamp bolt. 6) recheck termination height. maintenance 1) keep fixture clean at all times. 2) clean fixture with brush. 3) oil moving parts weekly, when in use. 4) store in a clean dry environment. spare parts insertion punch 8/6 way 69020-0122 insertion punch 8/8 way 69020-0127 strain relief punch 69020-0146 a.s. 04.03.15/issue d filename: sd-69008-0140 quality check termination quality against the molex wire termination specification for relevant product being terminated eg: ps-90650. a quality procedure should be in place to monitor output from this fixture. limitations this arbor press fixture can only be used for product stated in the description of this leaflet. |
Price & Availability of 0690187040
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |